Caution : If LED
fails to flash 3 times, the product design for three stage frequency
adjustable, The jumper 1 was setting in the first stage, please
remove jumper 1 from fist stage into second stage if above step
can't reach desired frequency, and retry above step until reach
desired frequency.
5. Code duplicate for each function key :
- For duplicate first function key on RMC-600,
press both units until first key button at the same time until
LED indicator flash 3 times (it indicates the code of the
original control has been copied) you can copy up to four
remote function control by following step above
- To copy other push button same remote, simply
press buttons of both remote simultaneously and wait for the
LED of RMC-600 to flash 3 times
- No further adjustment is required once the
first button is successfully copied.
- To start using the RMC-600 please remove
jumper 2 your RMC-600 is now operational.
IMPORTANT: Interference
that may cause undesired operation, please keep away from harmful
interference when duplicate.
- Intelligent Programmable
Remote Control
- "Direct Duplication"
of most commercial RF Remotes
1-4
|
5-9
|
10-24
|
25-49
|
50+
|
$45.00
|
$40.00
|
$35.00
|
$34.00
|
$30.00
|
|